# Latest **URL:** https://forum.bome.com/latest.md?page=1 [Latest](https://forum.bome.com/latest.md) · [Categories](https://forum.bome.com/categories.md) · [Tags](https://forum.bome.com/tags.md) **Page:** 2 --- ## [One way Named MIDI Virtual Ports](https://forum.bome.com/t/one-way-named-midi-virtual-ports/7945)
**Author:** [@Jonathan.Wing](https://forum.bome.com/u/Jonathan.Wing)\ **Replies:** 2\ **Last updated:** [September 8, 2026, 4:04pm UTC](https://forum.bome.com/t/one-way-named-midi-virtual-ports/7945 "2026-09-08T16:04:31Z")
Hello Steve! I apologize for resurrecting an old thread but I felt the topic here, specifically with your above quote, clearly establishes the issue as a jumping off point than if I were to start a fresh thread. This i… --- ## [Bome Network (Unlimited Ports) - Cubase Pro 15 unusable - very sluggish/non-responsive](https://forum.bome.com/t/bome-network-unlimited-ports-cubase-pro-15-unusable-very-sluggish-non-responsive/7797)
**Author:** [@Martin.Volerich](https://forum.bome.com/u/Martin.Volerich)\ **Replies:** 13\ **Last updated:** [April 25, 2026, 6:38pm UTC](https://forum.bome.com/t/bome-network-unlimited-ports-cubase-pro-15-unusable-very-sluggish-non-responsive/7797 "2026-04-25T18:38:34Z")
I was very happy to find and purchase Bome Network (w Unlimited Ports) earlier this afternoon. I have set up a few pairs of ports that are connected using the Bome Router. When I start Cubase Pro (15) my system is unusa… --- ## [Quiet BMT-friendly mini controllers?](https://forum.bome.com/t/quiet-bmt-friendly-mini-controllers/7930)
**Author:** [@matt.simpson3](https://forum.bome.com/u/matt.simpson3)\ **Replies:** 7\ **Last updated:** [September 3, 2026, 12:25pm UTC](https://forum.bome.com/t/quiet-bmt-friendly-mini-controllers/7930 "2026-09-03T12:25:29Z")
Hi folks - another one for the hive mind. I’m doing my dev for our team of homeworking voice artists using a Behringer XTouch Compact, but the a) the form factor is way overkill for what I really need and b) the motoris… --- ## [Problems sending FF and REW MMC commands to Logic 5.5.1 (Windows XP)](https://forum.bome.com/t/problems-sending-ff-and-rew-mmc-commands-to-logic-5-5-1-windows-xp/7938)
**Author:** [@twinreverb67](https://forum.bome.com/u/twinreverb67)\ **Replies:** 2\ **Last updated:** [September 1, 2026, 7:13pm UTC](https://forum.bome.com/t/problems-sending-ff-and-rew-mmc-commands-to-logic-5-5-1-windows-xp/7938 "2026-09-01T19:13:30Z")
Hello, My recording equipment is quite old. To be more precise, I’m using Logic 5.5.1 on Windows XP and a Soundcraft DC 2000 mixing desk from the 1990s besides some old 24-track analog tape machines. The DC 2000 can sen… --- ## [midi delay fx](https://forum.bome.com/t/midi-delay-fx/7936)
**Author:** [@Philip.Henzi](https://forum.bome.com/u/Philip.Henzi)\ **Replies:** 2\ **Last updated:** [September 1, 2026, 9:06am UTC](https://forum.bome.com/t/midi-delay-fx/7936 "2026-09-01T09:06:08Z")
Hi, did anybody attempt to program a polyphonic midi delay, possibly with delay time and feedback control via CC ? --- ## [Translator on bomebox](https://forum.bome.com/t/translator-on-bomebox/7929)
**Author:** [@nikael](https://forum.bome.com/u/nikael)\ **Replies:** 12\ **Last updated:** [September 1, 2026, 2:01am UTC](https://forum.bome.com/t/translator-on-bomebox/7929 "2026-09-01T02:01:08Z")
I have a translator that’s working: between two macs using Bome network. uses a midi input stream from one port (iac) on one mac, splits into four ports and sends to the other machine. I want to modify the translator to … --- ## [USB startup issue with Choisauce CS60 and BomeBox](https://forum.bome.com/t/usb-startup-issue-with-choisauce-cs60-and-bomebox/7933)
**Author:** [@Andreas.Ziller](https://forum.bome.com/u/Andreas.Ziller)\ **Replies:** 3\ **Last updated:** [August 31, 2026, 11:33pm UTC](https://forum.bome.com/t/usb-startup-issue-with-choisauce-cs60-and-bomebox/7933 "2026-08-31T23:33:05Z")
Hi everyone! I’ve been successfully using a Waveshare 4-port USB 2.0 switchable hub with my BomeBox for quite some time now. Until recently, I had the following devices connected to it: Midi Fighter Twister Keith McM… --- ## [BomeBox Firmware 1.6.1 and Network MIDI 2.0: Problem seeing Direct MIDI ports](https://forum.bome.com/t/bomebox-firmware-1-6-1-and-network-midi-2-0-problem-seeing-direct-midi-ports/7931)
**Author:** [@FlorianBome](https://forum.bome.com/u/FlorianBome)\ **Replies:** 0\ **Last updated:** [August 31, 2026, 11:36am UTC](https://forum.bome.com/t/bomebox-firmware-1-6-1-and-network-midi-2-0-problem-seeing-direct-midi-ports/7931 "2026-08-31T11:36:12Z")
Issue We can confirm a problem for this specific use case: Bome Network 1.7.0 running on Windows Exposing Direct MIDI ports on Network MIDI 2.0 BomeBox with firmware 1.6.1 In that case, the Direct MIDI ports are not … --- ## [Message filtering - dropping fader updates during fast fading](https://forum.bome.com/t/message-filtering-dropping-fader-updates-during-fast-fading/7909)
**Author:** [@matt.simpson3](https://forum.bome.com/u/matt.simpson3)\ **Replies:** 8\ **Last updated:** [August 27, 2026, 6:22am UTC](https://forum.bome.com/t/message-filtering-dropping-fader-updates-during-fast-fading/7909 "2026-08-27T06:22:33Z")
Hi - finally got all elements of my somewhat random project working, only to find the device I’m driving via the Bome box is being overwhelmed by every message from every step of the fader travel. Is there a sensible way… --- ## [Midi translator bn: manual/step by for install and use?, raspberry pi](https://forum.bome.com/t/midi-translator-bn-manual-step-by-for-install-and-use-raspberry-pi/7928)
**Author:** [@nikael](https://forum.bome.com/u/nikael)\ **Replies:** 1\ **Last updated:** [August 25, 2026, 2:52am UTC](https://forum.bome.com/t/midi-translator-bn-manual-step-by-for-install-and-use-raspberry-pi/7928 "2026-08-25T02:52:49Z")
are there any ‘how to’s’, instructions or a manual for translator bn? also, what are the differences between translator bn and running a translator on a bomebox? and do i need a ‘graphical’ raspberry pi or terminal ins… --- ## [Windows Sleep and Bome](https://forum.bome.com/t/windows-sleep-and-bome/7919)
**Author:** [@radekpilich](https://forum.bome.com/u/radekpilich)\ **Replies:** 4\ **Last updated:** [August 24, 2026, 11:38am UTC](https://forum.bome.com/t/windows-sleep-and-bome/7919 "2026-08-24T11:38:15Z")
Hey, is there some other way to resume BMT after Windows sleep other than closing and reopening the program? --- ## [MIDI Translator Pro Reverse Engineering Boomerang](https://forum.bome.com/t/midi-translator-pro-reverse-engineering-boomerang/7926)
**Author:** [@imu666](https://forum.bome.com/u/imu666)\ **Replies:** 1\ **Last updated:** [August 23, 2026, 11:20pm UTC](https://forum.bome.com/t/midi-translator-pro-reverse-engineering-boomerang/7926 "2026-08-23T23:20:51Z")
Hi, while researching Midi sysex i stumbled on the MIDI Translator Pro Software and i was wondering if it could help me with the following scenario. I use the Boomerang Phrase Sampler III Looper Pedal which according t… --- ## [Quick Filter](https://forum.bome.com/t/quick-filter/7921)
**Author:** [@Julien.Thuiland](https://forum.bome.com/u/Julien.Thuiland)\ **Replies:** 4\ **Last updated:** [August 23, 2026, 5:39pm UTC](https://forum.bome.com/t/quick-filter/7921 "2026-08-23T17:39:06Z")
Hi There, I was about to ask yesterday on this forum for a way to quickly find a CC number from a translator with a search function in an extensive mapping within Midi Translator. Looking at the manual it mentions a qui… --- ## [Trying to get Pro Tools and Bome Network to work in harmony](https://forum.bome.com/t/trying-to-get-pro-tools-and-bome-network-to-work-in-harmony/7894)
**Author:** [@jack.meginniss](https://forum.bome.com/u/jack.meginniss)\ **Replies:** 15\ **Last updated:** [August 23, 2026, 11:48am UTC](https://forum.bome.com/t/trying-to-get-pro-tools-and-bome-network-to-work-in-harmony/7894 "2026-08-23T11:48:06Z")
Steve, I could use your help please. Occasionally, I like to use Pro Tools 2026, but I don’t need Bome for those sessions. I use Bome when I use Cubase. Presently, when I launch a Pro Tools session it crashes on exit ev… --- ## [MIDI side Chain /UDucking](https://forum.bome.com/t/midi-side-chain-uducking/7916)
**Author:** [@mmmakii](https://forum.bome.com/u/mmmakii)\ **Replies:** 3\ **Last updated:** [August 21, 2026, 1:49pm UTC](https://forum.bome.com/t/midi-side-chain-uducking/7916 "2026-08-21T13:49:32Z")
Hello, Is there a BMT project or a code for ‘MIDI-triggered ducking using an inverted envelope’? The kick’s MIDI note-on is the trigger for a CC envelope that reduces target CC level. With userdefined Attack time and Rel… --- ## [Launch Control to Allen and Health QU SB](https://forum.bome.com/t/launch-control-to-allen-and-health-qu-sb/7914)
**Author:** [@Thomas.Trautmann](https://forum.bome.com/u/Thomas.Trautmann)\ **Replies:** 4\ **Last updated:** [August 19, 2026, 6:17am UTC](https://forum.bome.com/t/launch-control-to-allen-and-health-qu-sb/7914 "2026-08-19T06:17:43Z")
Dear SteveC I tried also to connect the novation launch control to an Allen &heath qu sb and with the option Allen & heath midi it seems to work but only the faders , but I’d like to assign some knobs for additional chan… --- ## [Licensing of Midi Translator BN](https://forum.bome.com/t/licensing-of-midi-translator-bn/7911)
**Author:** [@alan.schrank](https://forum.bome.com/u/alan.schrank)\ **Replies:** 4\ **Last updated:** [August 18, 2026, 5:21pm UTC](https://forum.bome.com/t/licensing-of-midi-translator-bn/7911 "2026-08-18T17:21:03Z")
My license of Bome Network covers 5 computers. If I purchase the Midi translator BN addon is that license good for use on those same 5 computers or does a license need to be purchased for each computer i want to run the … --- ## [Recursive Creation of Virtual Ports - AutoConnect to New Ports](https://forum.bome.com/t/recursive-creation-of-virtual-ports-autoconnect-to-new-ports/7906)
**Author:** [@Rohan.Stevenson](https://forum.bome.com/u/Rohan.Stevenson)\ **Replies:** 18\ **Last updated:** [August 17, 2026, 7:34pm UTC](https://forum.bome.com/t/recursive-creation-of-virtual-ports-autoconnect-to-new-ports/7906 "2026-08-17T19:34:27Z")
I am trying to use Bome in a very simple way: Connect 14 ports (16 midi channels each) to VEpro Standalone from Logic on a Mac to a PC. I need the port names on the Mac to be retained (‘Network 1’, ‘Network 2’, etc) bec… --- ## [Control Allen&Heath CQ Mixer with Launch Control XL using BomeBox](https://forum.bome.com/t/control-allen-heath-cq-mixer-with-launch-control-xl-using-bomebox/6949)
**Author:** [@johnnyleach](https://forum.bome.com/u/johnnyleach)\ **Replies:** 3\ **Last updated:** [May 20, 2025, 4:39pm UTC](https://forum.bome.com/t/control-allen-heath-cq-mixer-with-launch-control-xl-using-bomebox/6949 "2025-05-20T16:39:22Z")
Hello. Are there any resources that show how to set up my Bome Box to connect my Novation Launch Control XL HARDWIRED to my CQ18T? I need to be able to control my volume, mutes, mute groups/solos and send levels without … --- ## [Changing BMT projects during performance](https://forum.bome.com/t/changing-bmt-projects-during-performance/7910)
**Author:** [@fingerlight](https://forum.bome.com/u/fingerlight)\ **Replies:** 1\ **Last updated:** [August 14, 2026, 9:39pm UTC](https://forum.bome.com/t/changing-bmt-projects-during-performance/7910 "2026-08-14T21:39:56Z")
I am considering adding some programming to my existing BMT project. This will require more Global variables than will be available, despite the many Globals added since the inclusion of ox, px,qx … etc. Two possibilit… --- ## [BN Upgrade to 1.7.0](https://forum.bome.com/t/bn-upgrade-to-1-7-0/7907)
**Author:** [@Clint.Goss](https://forum.bome.com/u/Clint.Goss)\ **Replies:** 2\ **Last updated:** [August 14, 2026, 5:26pm UTC](https://forum.bome.com/t/bn-upgrade-to-1-7-0/7907 "2026-08-14T17:26:46Z")
I am running BN 1.6.0 and also have BN Pro 1.6.0 and the UMP 1.6.0 addon. They run great! I would like to upgrade to BN 1.7.0. How do I get BN Pro 1.7 and UMP 1.7? Do I need to re-purchase?? Thanks for any advice! --- ## [Updates: Bome Network 1.7 and BomeBox firmware 1.6.1](https://forum.bome.com/t/updates-bome-network-1-7-and-bomebox-firmware-1-6-1/7900)
**Author:** [@FlorianBome](https://forum.bome.com/u/FlorianBome)\ **Replies:** 2\ **Last updated:** [August 10, 2026, 4:26pm UTC](https://forum.bome.com/t/updates-bome-network-1-7-and-bomebox-firmware-1-6-1/7900 "2026-08-10T16:26:08Z")
Hi there, we’ve released new versions of Bome Network and the BomeBox firmware. Bome Network can now execute MIDI translations created in Bome MIDI Translator Pro, and we’ve also added the new Network MIDI 2.0 protocol … --- ## [BomeBox GUI not loading port or routing pages](https://forum.bome.com/t/bomebox-gui-not-loading-port-or-routing-pages/7810)
**Author:** [@Toby](https://forum.bome.com/u/Toby)\ **Replies:** 14\ **Last updated:** [August 9, 2026, 1:07am UTC](https://forum.bome.com/t/bomebox-gui-not-loading-port-or-routing-pages/7810 "2026-08-09T01:07:47Z")
Hi all, For some reason my stage bomebox won’t display the port or routing pages on the web GUI. The other pages load and seem to work fine. I tried downgrading to firmware 1.5.3, but the problem still persists. I noti… --- ## [How to focus on a python specific window or a build done with PyInstaller](https://forum.bome.com/t/how-to-focus-on-a-python-specific-window-or-a-build-done-with-pyinstaller/7899)
**Author:** [@Martyprod](https://forum.bome.com/u/Martyprod)\ **Replies:** 4\ **Last updated:** [August 9, 2026, 12:37am UTC](https://forum.bome.com/t/how-to-focus-on-a-python-specific-window-or-a-build-done-with-pyinstaller/7899 "2026-08-09T00:37:39Z")
Hi, I have a Python video application with its own GUI, and I want to control it from Bome MIDI Translator using a Steinberg CMC AI controller, especially for a slider/jog control. My problem is with Bome’s application… --- ## [Delay note off only](https://forum.bome.com/t/delay-note-off-only/7901)
**Author:** [@velopsych1](https://forum.bome.com/u/velopsych1)\ **Replies:** 1\ **Last updated:** [August 8, 2026, 11:40pm UTC](https://forum.bome.com/t/delay-note-off-only/7901 "2026-08-08T23:40:30Z")
How to program for sending unmodified note on + velocity and delay the corresponding note note off/velocity 0 on externally created port. Was able to generate delayed Note off but velocity was set to 127 with a fixed no… --- ## [Mapping F2 to Left Mouse Hold](https://forum.bome.com/t/mapping-f2-to-left-mouse-hold/7897)
**Author:** [@mc7795](https://forum.bome.com/u/mc7795)\ **Replies:** 3\ **Last updated:** [August 7, 2026, 2:59pm UTC](https://forum.bome.com/t/mapping-f2-to-left-mouse-hold/7897 "2026-08-07T14:59:34Z")
Hi, I’m trying to map the F2 function key to left mouse button hold. The idea is that if I press F2 I can then move the mouse and this will act as a dragging action. If I then press again F2 the left mouse button will be… --- ## [BomeBox not showing midi ports after firmware update to 1.6](https://forum.bome.com/t/bomebox-not-showing-midi-ports-after-firmware-update-to-1-6/7709)
**Author:** [@jsulva](https://forum.bome.com/u/jsulva)\ **Replies:** 5\ **Last updated:** [August 1, 2026, 1:49pm UTC](https://forum.bome.com/t/bomebox-not-showing-midi-ports-after-firmware-update-to-1-6/7709 "2026-08-01T13:49:30Z")
Hi, I just updated BMT and BomeBox to the newly released versions. (Thanks for the updates!) BMT update went smoothly, but BomeBox doesn’t show any midi ports or routes after the firmware update. I tried updating t… --- ## [Bome Network on macOS Sequoia 15.2: BomeBox Pending (off or not reachable)](https://forum.bome.com/t/bome-network-on-macos-sequoia-15-2-bomebox-pending-off-or-not-reachable/7786)
**Author:** [@alicdrums](https://forum.bome.com/u/alicdrums)\ **Replies:** 13\ **Last updated:** [August 1, 2026, 1:45pm UTC](https://forum.bome.com/t/bome-network-on-macos-sequoia-15-2-bomebox-pending-off-or-not-reachable/7786 "2026-08-01T13:45:44Z")
Hey guys, Just picked up 4 new Bome boxes. I had the network all setup for each device with manual IPs. I selected AutoStartup, rebooted the MacBooks & all of a sudden I’m getting the message “Pending (off or not reac… --- ## [Pair link disappeared from netmidi page](https://forum.bome.com/t/pair-link-disappeared-from-netmidi-page/7868)
**Author:** [@alphonso.mango](https://forum.bome.com/u/alphonso.mango)\ **Replies:** 7\ **Last updated:** [August 1, 2026, 1:43pm UTC](https://forum.bome.com/t/pair-link-disappeared-from-netmidi-page/7868 "2026-08-01T13:43:43Z")
This morning I swear there was a link on the netmidi page of the webconfig of my Bomebox that enabled me to acknowledge a connection request, below the text I quote below. This afternoon, it has disappeared. ‘By default… --- ## [Instability in bome box connection](https://forum.bome.com/t/instability-in-bome-box-connection/7871)
**Author:** [@atticusmas](https://forum.bome.com/u/atticusmas)\ **Replies:** 6\ **Last updated:** [August 1, 2026, 1:42pm UTC](https://forum.bome.com/t/instability-in-bome-box-connection/7871 "2026-08-01T13:42:49Z")
Hi, my bome box has worked rock solid for around a year now but recently seems to have kicked the bucket. At first it was not connecting at all, but after updating the firmware to the latest (which I don’t think was rele… [Previous page](https://forum.bome.com/latest.md) [Next page](https://forum.bome.com/latest.md?page=2)