# APC-MINI to Allen&Heath SQ6 Project - multiple channels using less translators

**URL:** <https://forum.bome.com/t/apc-mini-to-allen-heath-sq6-project-multiple-channels-using-less-translators/7718>\
**Category:** Tips & Tricks\
**Created:** [January 9, 2026, 2:43am UTC](https://forum.bome.com/t/apc-mini-to-allen-heath-sq6-project-multiple-channels-using-less-translators/7718 "2026-01-09T02:43:01Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![SteveC](https://forum.bome.com/user_avatar/forum.bome.com/stevec/32/8250_2.png) [@SteveC](https://forum.bome.com/u/SteveC)\
**Post date:** [January 9, 2026, 2:43am UTC](https://forum.bome.com/t/apc-mini-to-allen-heath-sq6-project-multiple-channels-using-less-translators/7718/1 "2026-01-09T02:43:01Z")

</div>

Hi,

I recently helped someone with this project file and though I’d post it here. It uses an APC-MINI MK2 to control 8 - Ip mutes and 9 Ip faders to LR level adjustments. Feel free to leverage it is you have this combination of controller and SQ Series controller.

Translator 1.0 handles mutes Ip1-Ip8

I’m using an APC-MINI MK2 as my input device and using Note-100-107 for mute but converting LSB to 0-7

In this example 100-107 note on MIDI CH 1 will send NRPN MSB 0 LSB 0-7 value 1 and note off will send MSB 0 LSB 0-7 value 1

Translator 1.2 handles levels Ip1-Ip9 (Linear taper) to L-R

I set the MSB to 0x40 and LSB is adjusted from CC48-56 to LSB 0-8. I set the value to MSB LSB based on the incoming value (qq).

My aliases are set as follows:

![image.png](https://mail.google.com/mail/u/0?ui=2&ik=9e62d9419e&attid=0.0.9&permmsgid=msg-f:1853591955522065545&th=19b94810136a1489&view=fimg&fur=ip&permmsgid=msg-f:1853591955522065545&sz=s0-l75-ft&attbid=ANGjdJ9ITWxRyu0pXh7bksZhU4FuGgk9NGnK9JcX_z_CHWPYMUluOcxv0ebeZ48iN-0nz2XEFxlsUYmT9tnemm2v9vUR7UQhLkncIx1TRoNtKm6e87mlAKNZeq2eCdU&disp=emb&realattid=ii_mk2whc4x8&zw)

You can learn more about aliases from [this tutorial](https://youtu.be/CrE391VJL0s).

For preset 1, I set device selection from ‘My Controller’ to ‘My-SQ6’.

You can learn more about device selection from [this tutorial](https://youtu.be/KunN2A1rKMY).

You can look at the rules of each translator , to change your target incoming note and CC numbers.

Using rules, allows you to use a less translator for multiple input values which is also a personal preference of mine.

[apc-mini-mk2-gma2-2026-01-08.bmtp](https://forum.bome.com/uploads/short-url/wkl3okHToeNnCbTPZTdAsIxbUUq.bmtp) (957 Bytes)

Steve Caldwell  
Bome Customer Care

* * *
_Also available for paid consulting services: bome@sniz.biz_