# Automatically route (send) all channel 2 messages to Virtual Port X

**URL:** <https://forum.bome.com/t/automatically-route-send-all-channel-2-messages-to-virtual-port-x/2722>\
**Category:** Bome Products\
**Tags:** sequencer, generic-remote, daw\
**Created:** [February 12, 2021, 9:52pm UTC](https://forum.bome.com/t/automatically-route-send-all-channel-2-messages-to-virtual-port-x/2722 "2021-02-12T21:52:16Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Regalix](https://forum.bome.com/letter_avatar_proxy/v4/letter/r/97f17d/32.png) [@Regalix](https://forum.bome.com/u/Regalix)\
**Post date:** [February 12, 2021, 9:52pm UTC](https://forum.bome.com/t/automatically-route-send-all-channel-2-messages-to-virtual-port-x/2722/1 "2021-02-12T21:52:16Z")

</div>

**Problem: The new midi controller I’m using is NOT multi-client ready.**

So, having the Sequencer receiving both from BOME MT Virtual Out AND the same hardware midi controller itself - doesn’t work.

I have installed a virtual midi port software to be fired up both in BOME MT and the Sequencer. In that way, hopefully, I can set all the channel 2 messages to be sent (bidirectional) to that virtual midi Port X from BOME MT.

As the midi communication on channel 2 is bidirectional (Generic Remote), I need the Sequencer to be able to send the current state back, to preserve parameter jumping. Al that worked per default with my previous multi-client midi controller thanks to your Bome MT preset additions here on the forum.

Let us start simple: **Can you please suggest a Bome MT preset that will automatically route (send) all channel 2 messaged to Port X?**

Btw, shall I also create an Alias for Bome MT input for that?

Thank you in advance.

---

<div class="post-metadata">

**Author:** ![SteveC](https://forum.bome.com/user_avatar/forum.bome.com/stevec/32/8250_2.png) [@SteveC](https://forum.bome.com/u/SteveC)\
**Post date:** [February 13, 2021, 1:13am UTC](https://forum.bome.com/t/automatically-route-send-all-channel-2-messages-to-virtual-port-x/2722/2 "2021-02-13T01:13:58Z")

</div>

Hi,

I’m not sure what you mean by “multi-client” support. On Windows one applicatnoi or device can access a given port at a time. For this reason, you can use Bome MIDI Translator Pro to route to different ports.

It the attached examples are 4 presets. Each preset has it’s on routing

Preset 0 - Controller to BMT1  
Preset 1 - BMT1 to Controller  
Preset 2 - Controller to BMT2  
Preset 3 - BMT2 to Controller

You can see this in the preset routing

Each preset has 2 translators

Any 3 byte message  
Anny 2 byte message

In the rules of the translators we look at the incoming MIDI channel.  
The translators of the first 2 presets, will only pass through MIDI Channel 2 messages.  
We look at the first byte (the status byte) of each incoming MIDI message. If it is not MIDI CH 2 (1), then they do nothing.

The translators of the 2nd 2 presets will only pass through non MIDI Channel 2 messages.

The rules for the first 2 presets look like this:

// get channel  
rr=oo&15  
// Look for Channel 2  
if rr!=1 then exit rules, skip Outgoing Action

The rules for the second 2 presets look like this:  
// get channel  
rr=oo&15  
// Look for Channel 2  
if rr==1 then exit rules, skip Outgoing Action

Again, each preset has its routing defined allowing port routing to be conditional by MIDI channel.

[This tutorial,](https://youtu.be/KunN2A1rKMY) shows how to use presets for port routing.

Note, that everything is controlled by translators (no MIDI THRU paths). If you need to pass through SysEX messages or 1 byte message (which don’t contain channel information). You will need to add static MIDI thru routes.

You should set up the alias “My Controller” to your device.

[conditional-routing-2021-02-12.bmtp](https://forum.bome.com/uploads/short-url/nQ804iVGxyIc6ASooEAyGJViD9a.bmtp) (3.0 KB)

Steve Caldwell  
Bome Customer Care

* * *
_Also available for paid consulting services: bome@sniz.biz_
