# Behringer Xtouch Compact midi feedback loop

**URL:** <https://forum.bome.com/t/behringer-xtouch-compact-midi-feedback-loop/7816>\
**Category:** Bome Products\
**Created:** [April 30, 2026, 8:49am UTC](https://forum.bome.com/t/behringer-xtouch-compact-midi-feedback-loop/7816 "2026-04-30T08:49:22Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Thunderingjacks](https://forum.bome.com/letter_avatar_proxy/v4/letter/t/b5a626/32.png) [@Thunderingjacks](https://forum.bome.com/u/Thunderingjacks)\
**Post date:** [April 30, 2026, 8:49am UTC](https://forum.bome.com/t/behringer-xtouch-compact-midi-feedback-loop/7816/1 "2026-04-30T08:49:22Z")

</div>

Hello, I have a question in regard to getting midi feedback to the motorized faders on my Behringer Xtouch compact.

1. Behringer Midi DIN in/out into Bomebox DIN
2. Midi received by Resolume on a Mac and PC on the network.
3. I move a fader on the Behringer and it triggers an endless midi feedback loop.
4. the same happens when moving a fader on Resolume.

How should this be configured to avoid this?

Thank you,

S

---

<div class="post-metadata">

**Author:** ![SteveC](https://forum.bome.com/user_avatar/forum.bome.com/stevec/32/8250_2.png) [@SteveC](https://forum.bome.com/u/SteveC)\
**Post date:** [April 30, 2026, 2:41pm UTC](https://forum.bome.com/t/behringer-xtouch-compact-midi-feedback-loop/7816/2 "2026-04-30T14:41:32Z")

</div>

Hi and welcome to the Bome community!

Are you running a MIDI translator Project on your BomeBox?

If not, have you looked at the routing page and turned of the automatic routes. You should probably not have a route from MIDI DIN In to MIDI DIN Out.

Maybe show screenshots of your routing page on BomeBox and if you are running a project, on it, can you share the project?

Steve Caldwell  
Bome Customer Care

* * *
_Also available for paid consulting services: bome@sniz.biz_

---

<div class="post-metadata">

**Author:** ![Thunderingjacks](https://forum.bome.com/letter_avatar_proxy/v4/letter/t/b5a626/32.png) [@Thunderingjacks](https://forum.bome.com/u/Thunderingjacks)\
**Post date:** [May 1, 2026, 10:11am UTC](https://forum.bome.com/t/behringer-xtouch-compact-midi-feedback-loop/7816/3 "2026-05-01T10:11:19Z")

</div>

Hello Steve, thx for the reply.

I was using Translator Pro but in the end that just complicated things.

I stripped everything back to just input and output on the Bome network tool and it seems to have solved the problem?

Thx, S