# Browser up/down encoder to keystroke MT pro

**URL:** <https://forum.bome.com/t/browser-up-down-encoder-to-keystroke-mt-pro/1418>\
**Category:** Bome Products\
**Created:** [March 28, 2020, 4:06pm UTC](https://forum.bome.com/t/browser-up-down-encoder-to-keystroke-mt-pro/1418 "2020-03-28T16:06:35Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![SteveC](https://forum.bome.com/user_avatar/forum.bome.com/stevec/32/8250_2.png) [@SteveC](https://forum.bome.com/u/SteveC)\
**Post date:** [March 28, 2020, 4:30pm UTC](https://forum.bome.com/t/browser-up-down-encoder-to-keystroke-mt-pro/1418/2 "2020-03-28T16:30:32Z")

</div>

Hi,

Please see the attached file. There are two ways to address this type of issue.

1. Use a timer to send up keystrokes at a given rate if the encoder is above a given threshold and a down keystroke if it is below a given threshold. For instance from 0-54 send down keystrokes continuously. If 74-127 send up keystrokes. If between 54 and 74, kill the timer so keystroke stop.
2. Use a button to disable output while you adjust the knob to give you more room for the knob.

Preset 0 in the attached file uses the timer method. Preset 1 uses the button method. Only enable one or the other depending on the method you want.

&nbsp;

Hopefully this will give you what you need.

Steve Caldwell  
Bome Q and A Moderator and  
Independent Bome Consultant/Specialist  
bome@sniz.biz

&nbsp;

  
**Attachments:**  
[**1585409425414\_Absolute-Encoder-to-Keystroke-2020-03-28.bmtp**](https://www.bome.com/wp-content/uploads/cma_attachments/1585409425414_Absolute-Encoder-to-Keystroke-2020-03-28.bmtp)

---

_[View the full topic](https://forum.bome.com/t/browser-up-down-encoder-to-keystroke-mt-pro/1418)._