# EOS Lighting Software with two midi Controllers

**URL:** <https://forum.bome.com/t/eos-lighting-software-with-two-midi-controllers/4885>\
**Category:** Bome Products\
**Tags:** midi-translator\
**Created:** [February 18, 2023, 10:21am UTC](https://forum.bome.com/t/eos-lighting-software-with-two-midi-controllers/4885 "2023-02-18T10:21:52Z")\
**Posts on this page:** 7\
**Page:** 1

<div class="post-metadata">

**Author:** ![Shaneey](https://forum.bome.com/letter_avatar_proxy/v4/letter/s/b5a626/32.png) [@Shaneey](https://forum.bome.com/u/Shaneey)\
**Post date:** [February 18, 2023, 10:21am UTC](https://forum.bome.com/t/eos-lighting-software-with-two-midi-controllers/4885/1 "2023-02-18T10:21:52Z")

</div>

Hi Bome Community, first post here

I am a Lighting Operator In West of Ireland  
I seek a question that I don’t know is possible.

I have two Midi Controllers Akai APC20’s that I wish to use independently from each other sending different output Midi Signals

1. The way I have it now when both devices plugged in they act in sync to each other or paired
2. is it possible to use both devices with this software ; Note I have no purchased yet wondering if it will be possible FIRST!

I will share some of my photos in efforts to give you all a better understanding on the project I seek

This is Eos Family Lighting console setting where I enable MIDI Controllers  
I have got this function to work with one Akai APC20

 ![eos enabled](https://forum.bome.com/uploads/default/original/2X/5/5b56f1173bf3e546d2e0f48b7c395dabbc075434.png)

this is the Shell of the Console where I get the IP address to pair my Midi Devices to Software

 ![SHELL OF CONSOLE](https://forum.bome.com/uploads/default/original/2X/f/faa99773be74afeeea7bde3e96a3638d8eb4b614.png)

This is the software I use to map and control the Midi Device .This software is called Luminious it was developed by EOS Programmers to use in conjunction with Midi Controls

 ![Luminious](https://forum.bome.com/uploads/default/original/2X/7/70db3c1a8ec1430878c31135caffa403239881fb.jpeg)

this option on right top corner turns green to show is active with EOS software to know they are paired and speaking to each other  
 ![software_online](https://forum.bome.com/uploads/default/original/2X/d/df8f53142d6c74cb74dbd2c193450f011238049a.png)

---

<div class="post-metadata">

**Author:** ![SteveC](https://forum.bome.com/user_avatar/forum.bome.com/stevec/32/8250_2.png) [@SteveC](https://forum.bome.com/u/SteveC)\
**Post date:** [February 18, 2023, 1:03pm UTC](https://forum.bome.com/t/eos-lighting-software-with-two-midi-controllers/4885/2 "2023-02-18T13:03:16Z")

</div>

Hi and welcome to the Bome community!

Well there is a piece of the puzzle I do not understand, so I will need to ask a few question first.

In your Luminosus software, is there any way to pick which MIDI device your want to use for input or is it opening all available MIDI ports?  
If you can select a single input port, then we should be able to use Bome MIDI Translator to merge the inputs from both controllers and send to one virtual MIDI port while translating the input from one of the controllers so that from a Luminosus point of view, the two controllers will appear as one controller instead of 2.

So the picture would look like this

APC20(1) ------\> Bome MIDI Translator Pro (MIDI THRU) → Bome Virtual Port 1  
APC20(2) -------\>Bome MIDI Translator Pro (Translated) → Bome Virtual Port 1

Then set up Luminosus to look only and Bome Virtual Port 1 (which might be seen by Luminosus as “BMT 1”.

Steve Caldwell  
Bome Customer Care

* * *
_Also available for paid consulting services: bome@sniz.biz_

---

<div class="post-metadata">

**Author:** ![Shaneey](https://forum.bome.com/letter_avatar_proxy/v4/letter/s/b5a626/32.png) [@Shaneey](https://forum.bome.com/u/Shaneey)\
**Post date:** [February 21, 2023, 10:01pm UTC](https://forum.bome.com/t/eos-lighting-software-with-two-midi-controllers/4885/3 "2023-02-21T22:01:12Z")

</div>

Hi Steve,

Apologies only getting back to you now I was working all week doing a Musical.

To answer you’re question firstly this is what the Inputs look like when I put USB/MIDI devices into Luminosus

 ![settings](https://forum.bome.com/uploads/default/original/2X/e/ef5f8f61cb0cd06afe556b2443b0924b46915433.png)

APC20(1)—APC20(2) is Device 1;  
APC20(2)–APC20(3) is Device 2;

So I believe Luminosus just shows all devices when connected MIDI ports and USB ports via PC. There doesn’t seem to be a limit on how many devices can be connected at once within this software. I think it’s only depends on how many USB hubs my Pc can output. I have connected before 3x Akai apc20 and a 1x Akai MPK Mini and a 1x Korg nanoPAD 2 they all have worked.

But I wish to use EOS with two Apc20 very simular to how most user on YouTube can operate a GrandMA2 with 4 or 5 of the same Midi Controllers.

This Example you mentioned,

APC20(1) ------\> Bome MIDI Translator Pro (MIDI THRU) → Bome Virtual Port 1  
APC20(2) -------\>Bome MIDI Translator Pro (Translated) → Bome Virtual Port 1

does this look like from evidence “photo shared above” be possible to achieve this result.

Kinda Regards Shane

---

<div class="post-metadata">

**Author:** ![SteveC](https://forum.bome.com/user_avatar/forum.bome.com/stevec/32/8250_2.png) [@SteveC](https://forum.bome.com/u/SteveC)\
**Post date:** [February 22, 2023, 12:54am UTC](https://forum.bome.com/t/eos-lighting-software-with-two-midi-controllers/4885/4 "2023-02-22T00:54:57Z")

</div>

Hi,

Please change your input and output ports from APC-20 1 to  
BMT 1. Do Not use APC-20 1 or APC-20 2 within your software.

Then use the attached Bome MIDI Translator Project.

In this project I’m passing everything untouched from APC-20 1 to Application. I’m doing the same for the reverse path.

I’m taking the output from APC-20 2 and passing them through translators to increase the incoming MIDI channel to an outgoing MIDI channel of 8 higher.  
Then I use reverse translators from the application to put them back to the original MIDI channel.

Here is how the static routing is set up.

![image](https://forum.bome.com/uploads/default/original/2X/4/43634ee106b9b782db2b34bbdfdf0c4bb4f92837.png)

I set the ports for the presets as follows.

APC-20 2 to Application  
 ![image](https://forum.bome.com/uploads/default/original/2X/4/4c3fba5b42b278af435d68499c9c5bf43aa9a14a.png)

Application to APC-20 2  
 ![image](https://forum.bome.com/uploads/default/original/2X/e/e80dc3bc1af6b55b214c237d3d684a296942b440.png)

Then I set up the aliases as follows. Your application will likely see this under the short name that Bome MID Translator Exposes (BMT 1).

![image](https://forum.bome.com/uploads/default/original/2X/8/87a25e82a262ec586fe6cd6f8261c4a8f67af445.png)

Here is the project file.

[2-APC-20s-to-EOS-2023-02-21.bmtp](https://forum.bome.com/uploads/short-url/aykFRbuBkqI9c5fvNtgo1dA17UZ.bmtp) (2.4 KB)

As far as your other controllers, you should be able to use them directly but if MIDI learn is not smart enough, we may need to do something with them too.

Steve Caldwell  
Bome Customer Care

* * *
_Also available for paid consulting services: bome@sniz.biz_

---

<div class="post-metadata">

**Author:** ![Shaneey](https://forum.bome.com/letter_avatar_proxy/v4/letter/s/b5a626/32.png) [@Shaneey](https://forum.bome.com/u/Shaneey)\
**Post date:** [February 22, 2023, 4:31am UTC](https://forum.bome.com/t/eos-lighting-software-with-two-midi-controllers/4885/5 "2023-02-22T04:31:58Z")

</div>

So I have tried all of this and It has worked but not worked , This could be a Luminious Issue/ problem…The second APC is connected and shows up within the inputs/outputs

 ![inputs outputs](https://forum.bome.com/uploads/default/original/2X/a/a6cff6ec712c2308c0ca0ef27523a7e3d67eaac5.png)

I also played around with Bomes to see if it could recognise the Midi Controllers if there was a weird output issue  
 ![syntax](https://forum.bome.com/uploads/default/original/2X/e/e21eb82afaeb5120632295a639349143482473cd.png)  
 ![syntax2](https://forum.bome.com/uploads/default/original/2X/5/52918b1542234e5483ff47a1cf98ed110e784de3.png)

 ![Image5](https://forum.bome.com/uploads/default/original/2X/c/ca5c4a7777b34c6f07ecac6e6c8abb6bae35f49b.png)

 ![Image4](https://forum.bome.com/uploads/default/original/2X/8/8e853029103cd172e699a1ffd99f8b4174a9d5c9.png)

The LEDS lights don’t show up on the second APC when connected. Which lead to me believe it was there and not using the same Midi signal as the first one

1. I go to configure or rewrite midi to Controller APC2 it actively does the same as First APC1 without the leds lighting up

2. This software is coded by the EOS Programmers I cant change the Fader Options they act as the first fader (only) if this was possible to change from fader 11 to 19 it might work within Luminious  

3. How difficult would it be to rewrite everything within bome effectively…The first APC has all the midi data already connected to it from Luminious so I would basically just copy and past everything  
into here?  
 ![outgoings](https://forum.bome.com/uploads/default/original/2X/e/e8023bc0229f2ef4f0a169458e824e32a39b1f89.png)

Fader 1 on the APC20… The syntax is all of this data, I don’t know if this is a continuous Midi Note with Hex values from 0 to 100

1: IN 0.0 MIDI B0 07 03, oo=0xB0 pp=0x07 qq=0x03  
2: OUT 0.0 MIDI F8 07 03  
3: IN 1.0 MIDI B0 07 03, oo=0xB0 pp=0x07 qq=0x03  
4: OUT 1.0 MIDI F8 07 03  
5: IN 0.0 MIDI B0 07 08, oo=0xB0 pp=0x07 qq=0x08  
6: OUT 0.0 MIDI F8 07 08  
7: IN 1.0 MIDI B0 07 08, oo=0xB0 pp=0x07 qq=0x08  
8: OUT 1.0 MIDI F8 07 08  
9: IN 0.0 MIDI B0 07 0E, oo=0xB0 pp=0x07 qq=0x0E  
10: OUT 0.0 MIDI F8 07 0E  
11: IN 1.0 MIDI B0 07 0E, oo=0xB0 pp=0x07 qq=0x0E  
12: OUT 1.0 MIDI F8 07 0E  
13: IN 0.0 MIDI B0 07 15, oo=0xB0 pp=0x07 qq=0x15  
14: OUT 0.0 MIDI F8 07 15  
15: IN 1.0 MIDI B0 07 15, oo=0xB0 pp=0x07 qq=0x15  
16: OUT 1.0 MIDI F8 07 15  
17: IN 0.0 MIDI B0 07 1F, oo=0xB0 pp=0x07 qq=0x1F  
18: OUT 0.0 MIDI F8 07 1F  
19: IN 1.0 MIDI B0 07 1F, oo=0xB0 pp=0x07 qq=0x1F  
20: OUT 1.0 MIDI F8 07 1F  
21: IN 0.0 MIDI B0 07 27, oo=0xB0 pp=0x07 qq=0x27  
22: OUT 0.0 MIDI F8 07 27  
23: IN 1.0 MIDI B0 07 27, oo=0xB0 pp=0x07 qq=0x27  
24: OUT 1.0 MIDI F8 07 27  
25: IN 0.0 MIDI B0 07 30, oo=0xB0 pp=0x07 qq=0x30  
26: OUT 0.0 MIDI F8 07 30  
27: IN 1.0 MIDI B0 07 30, oo=0xB0 pp=0x07 qq=0x30  
28: OUT 1.0 MIDI F8 07 30  
29: IN 0.0 MIDI B0 07 3B, oo=0xB0 pp=0x07 qq=0x3B  
30: OUT 0.0 MIDI F8 07 3B  
31: IN 1.0 MIDI B0 07 3B, oo=0xB0 pp=0x07 qq=0x3B  
32: OUT 1.0 MIDI F8 07 3B  
33: IN 0.0 MIDI B0 07 45, oo=0xB0 pp=0x07 qq=0x45  
34: OUT 0.0 MIDI F8 07 45  
35: IN 1.0 MIDI B0 07 45, oo=0xB0 pp=0x07 qq=0x45  
36: OUT 1.0 MIDI F8 07 45  
37: IN 0.0 MIDI B0 07 4F, oo=0xB0 pp=0x07 qq=0x4F  
38: OUT 0.0 MIDI F8 07 4F  
39: IN 1.0 MIDI B0 07 4F, oo=0xB0 pp=0x07 qq=0x4F  
40: OUT 1.0 MIDI F8 07 4F  
41: IN 0.0 MIDI B0 07 65, oo=0xB0 pp=0x07 qq=0x65  
42: OUT 0.0 MIDI F8 07 65  
43: IN 1.0 MIDI B0 07 65, oo=0xB0 pp=0x07 qq=0x65  
44: OUT 1.0 MIDI F8 07 65  
45: IN 0.0 MIDI B0 07 6F, oo=0xB0 pp=0x07 qq=0x6F  
46: OUT 0.0 MIDI F8 07 6F  
47: IN 1.0 MIDI B0 07 6F, oo=0xB0 pp=0x07 qq=0x6F  
48: OUT 1.0 MIDI F8 07 6F  
49: IN 0.0 MIDI B0 07 7E, oo=0xB0 pp=0x07 qq=0x7E  
50: OUT 0.0 MIDI F8 07 7E  
51: IN 1.0 MIDI B0 07 7E, oo=0xB0 pp=0x07 qq=0x7E  
52: OUT 1.0 MIDI F8 07 7E  
53: IN 0.0 MIDI B0 07 7F, oo=0xB0 pp=0x07 qq=0x7F  
54: OUT 0.0 MIDI F8 07 7F  
55: IN 1.0 MIDI B0 07 7F, oo=0xB0 pp=0x07 qq=0x7F  
56: OUT 1.0 MIDI F8 07 7F  
57: IN 0.0 MIDI B0 07 00, oo=0xB0 pp=0x07 qq=0x00  
58: OUT 0.0 MIDI F8 07 00  
59: IN 1.0 MIDI B0 07 00, oo=0xB0 pp=0x07 qq=0x00  
60: OUT 1.0 MIDI F8 07 00  
61: IN 0.0 MIDI B0 07 7A, oo=0xB0 pp=0x07 qq=0x7A  
62: OUT 0.0 MIDI F8 07 7A  
63: IN 1.0 MIDI B0 07 7A, oo=0xB0 pp=0x07 qq=0x7A  
64: OUT 1.0 MIDI F8 07 7A  
65: IN 0.0 MIDI B0 07 74, oo=0xB0 pp=0x07 qq=0x74  
66: OUT 0.0 MIDI F8 07 74  
67: IN 1.0 MIDI B0 07 74, oo=0xB0 pp=0x07 qq=0x74  
68: OUT 1.0 MIDI F8 07 74  
69: IN 0.0 MIDI B0 07 6E, oo=0xB0 pp=0x07 qq=0x6E  
70: OUT 0.0 MIDI F8 07 6E  
71: IN 1.0 MIDI B0 07 6E, oo=0xB0 pp=0x07 qq=0x6E  
72: OUT 1.0 MIDI F8 07 6E  
73: IN 0.0 MIDI B0 07 66, oo=0xB0 pp=0x07 qq=0x66  
74: OUT 0.0 MIDI F8 07 66  
75: IN 1.0 MIDI B0 07 66, oo=0xB0 pp=0x07 qq=0x66  
76: OUT 1.0 MIDI F8 07 66  
77: IN 0.0 MIDI B0 07 5E, oo=0xB0 pp=0x07 qq=0x5E  
78: OUT 0.0 MIDI F8 07 5E  
79: IN 1.0 MIDI B0 07 5E, oo=0xB0 pp=0x07 qq=0x5E  
80: OUT 1.0 MIDI F8 07 5E  
81: IN 0.0 MIDI B0 07 55, oo=0xB0 pp=0x07 qq=0x55  
82: OUT 0.0 MIDI F8 07 55  
83: IN 1.0 MIDI B0 07 55, oo=0xB0 pp=0x07 qq=0x55  
84: OUT 1.0 MIDI F8 07 55  
85: IN 0.0 MIDI B0 07 4A, oo=0xB0 pp=0x07 qq=0x4A  
86: OUT 0.0 MIDI F8 07 4A  
87: IN 1.0 MIDI B0 07 4A, oo=0xB0 pp=0x07 qq=0x4A  
88: OUT 1.0 MIDI F8 07 4A  
89: IN 0.0 MIDI B0 07 41, oo=0xB0 pp=0x07 qq=0x41  
90: OUT 0.0 MIDI F8 07 41  
91: IN 1.0 MIDI B0 07 41, oo=0xB0 pp=0x07 qq=0x41  
92: OUT 1.0 MIDI F8 07 41  
93: IN 0.0 MIDI B0 07 37, oo=0xB0 pp=0x07 qq=0x37  
94: OUT 0.0 MIDI F8 07 37  
95: IN 1.0 MIDI B0 07 37, oo=0xB0 pp=0x07 qq=0x37  
96: OUT 1.0 MIDI F8 07 37  
97: IN 0.0 MIDI B0 07 2C, oo=0xB0 pp=0x07 qq=0x2C  
98: OUT 0.0 MIDI F8 07 2C  
99: IN 1.0 MIDI B0 07 2C, oo=0xB0 pp=0x07 qq=0x2C  
100: OUT 1.0 MIDI F8 07 2C  
101: IN 0.0 MIDI B0 07 22, oo=0xB0 pp=0x07 qq=0x22  
102: OUT 0.0 MIDI F8 07 22  
103: IN 1.0 MIDI B0 07 22, oo=0xB0 pp=0x07 qq=0x22  
104: OUT 1.0 MIDI F8 07 22  
105: IN 0.0 MIDI B0 07 17, oo=0xB0 pp=0x07 qq=0x17  
106: OUT 0.0 MIDI F8 07 17  
107: IN 1.0 MIDI B0 07 17, oo=0xB0 pp=0x07 qq=0x17  
108: OUT 1.0 MIDI F8 07 17  
109: IN 0.0 MIDI B0 07 0A, oo=0xB0 pp=0x07 qq=0x0A  
110: OUT 0.0 MIDI F8 07 0A  
111: IN 1.0 MIDI B0 07 0A, oo=0xB0 pp=0x07 qq=0x0A  
112: OUT 1.0 MIDI F8 07 0A  
113: IN 0.0 MIDI B0 07 01, oo=0xB0 pp=0x07 qq=0x01  
114: OUT 0.0 MIDI F8 07 01  
115: IN 1.0 MIDI B0 07 01, oo=0xB0 pp=0x07 qq=0x01  
116: OUT 1.0 MIDI F8 07 01  
117: IN 0.0 MIDI B0 07 00, oo=0xB0 pp=0x07 qq=0x00  
118: OUT 0.0 MIDI F8 07 00  
119: IN 1.0 MIDI B0 07 00, oo=0xB0 pp=0x07 qq=0x00  
120: OUT 1.0 MIDI F8 07 00

1. Have you any experience with ShowCockpit while running Bome in-conjunction

---

<div class="post-metadata">

**Author:** ![SteveC](https://forum.bome.com/user_avatar/forum.bome.com/stevec/32/8250_2.png) [@SteveC](https://forum.bome.com/u/SteveC)\
**Post date:** [February 22, 2023, 5:35am UTC](https://forum.bome.com/t/eos-lighting-software-with-two-midi-controllers/4885/6 "2023-02-22T05:35:17Z")

</div>

Hi, First of all I apologize as the project file I sent you had some errors. You can try this one.

Secondly. I changed the strategy so you should be able to directly connect all of your controllers up to Luminosus directly (if they are working) except for your second APC20. Does Luminosus allow you to de-select MIDI ports that you don’t want you to use? If not, there may be a problem.

On your first APC-20 are all of your faders working correctly (the one that is directly connected?

So here is what I suggest

1. Disable Akai APC20 for your second device. (both in and out)
2. I’m not sure what you have connected to LoopBe so disable those for now. (in and out)
3. Enable Bome MIDI Translator 1 for Both in and out.
4. Don’t start Bome MIDI Translator yet. We need some testing with this configuration before we do that.

Then try your configuration without the second APC-20  
If the first APC-20 is working on all faders that would be good news. If not, it is possible that Luminosus is expecting different message to move the faders so we will need to determine which CC#s they require for all faders.

If you can MIDI learn the fader, that would be good news. Once you get the first APC-20 all working, you should be able to connect Bome MIDI Translator Pro up and set up your aliases to point to your second APC-20 and the application (Bome MIDI Translator 1). Then learn the controls on the second APC-20.

If you cannot use MIDI learn, we need to know what MIDI messages Luminosus is needing so you will need to either ask them or consult the documentation. Then we should be able to set up translators to match what the application needs.

If we cannot use Luminosus, all may still not be lost. We may need to look at the EOS software to see if it can take MIDI directly without Luminosus. Of course that could be problematic if you really want to keep Luminosus for other than MIDI conversion.

[APC-20-number2–to-EOS-2023-02-21.bmtp](https://forum.bome.com/uploads/short-url/6HARQiuSXDWUKG0OO0jPSJTARqC.bmtp) (2.3 KB)

Steve Caldwell  
Bome Customer Care

* * *
_Also available for paid consulting services: bome@sniz.biz_

---

<div class="post-metadata">

**Author:** ![SteveC](https://forum.bome.com/user_avatar/forum.bome.com/stevec/32/8250_2.png) [@SteveC](https://forum.bome.com/u/SteveC)\
**Post date:** [December 17, 2023, 1:59pm UTC](https://forum.bome.com/t/eos-lighting-software-with-two-midi-controllers/4885/7 "2023-12-17T13:59:25Z")

</div>

2 posts were split to a new topic: [Using APC MINI MKII with Lanbox LCX](https://forum.bome.com/t/using-apc-mini-mkii-with-lanbox-lcx/5770)