# Green frame capture problem and Outgoing mouse settings for DaVinci Resolve specific control types **URL:** \ **Category:** Bome Products\ **Tags:** maschine-mk2, bt-vs-controllermate, bt-roadmap, efficient-set-up, davinci-fusion, delay-set-up, relative-offset-mode, midigrade-vs-tachyon, akai-apc-40\ **Created:** [March 28, 2022, 12:04pm UTC](https://forum.bome.com/t/green-frame-capture-problem-and-outgoing-mouse-settings-for-davinci-resolve-specific-control-types/4139 "2022-03-28T12:04:36Z")\ **Posts on this page:** 1\ **Showing post:** 18
**Author:** ![Claudio.D](https://forum.bome.com/letter_avatar_proxy/v4/letter/c/ecccb3/32.png) [@Claudio.D](https://forum.bome.com/u/Claudio.D)\ **Post date:** [April 2, 2022, 12:17am UTC](https://forum.bome.com/t/green-frame-capture-problem-and-outgoing-mouse-settings-for-davinci-resolve-specific-control-types/4139/18 "2022-04-02T00:17:56Z")
Hi Steve, While I was setting up my Maschine MK2 knobs to “relative offset” mode, I come across a behavior that I did not expect, which is when I turned the knob the MK2 was outputting on its screen only 2 values: 0 and 2 ! Checking the above MIDI output on Bome translator it turned out that those values were actually 63 and 65. I thought initially there was something wrong in having only 2 values as output from a relative offset mode until luckily I came across a wonderful post from you on this thread [Translating absolute MIDI CC into relative -1/+1 values](https://forum.bome.com/t/translating-absolute-midi-cc-into-relative-1-1-values/1369) which explains in deep and very well, beside other things, how various types of relative encoders work. That has been a godsend for me and I wish to thank you for that excellent post and to mention solution link on this thread so that will be easier for other users to find it. Take care. --- _[View the full topic](https://forum.bome.com/t/green-frame-capture-problem-and-outgoing-mouse-settings-for-davinci-resolve-specific-control-types/4139)._