# OSC ? - - - **URL:** \ **Category:** Bome Products\ **Created:** [May 14, 2017, 5:31pm UTC](https://forum.bome.com/t/osc/796 "2017-05-14T17:31:24Z")\ **Posts on this page:** 12\ **Page:** 1
**Author:** ![neil2](https://forum.bome.com/letter_avatar_proxy/v4/letter/n/f14d63/32.png) [@neil2](https://forum.bome.com/u/neil2)\ **Post date:** [May 14, 2017, 5:31pm UTC](https://forum.bome.com/t/osc/796/1 "2017-05-14T17:31:24Z")
Hi, Is OSC implemented in MT yet? I've just downloaded the latest demo version but I cant see it mentioned in the menu's or the documentation. If its not there yet do you have a time frame? Thanks! ---
**Author:** ![SteveC](https://forum.bome.com/user_avatar/forum.bome.com/stevec/32/8250_2.png) [@SteveC](https://forum.bome.com/u/SteveC)\ **Post date:** [May 14, 2017, 6:46pm UTC](https://forum.bome.com/t/osc/796/2 "2017-05-14T18:46:37Z")
No OSC is not in there. Someone asked similar question a few days ago. I have a message to Florian about this and other possibly planned features. Steve [bome@sniz.biz](mailto:bome@sniz.biz) Independent Bome Programming Specialst Bome Q&A Moderator.   ---
**Author:** ![neil2](https://forum.bome.com/letter_avatar_proxy/v4/letter/n/f14d63/32.png) [@neil2](https://forum.bome.com/u/neil2)\ **Post date:** [May 14, 2017, 6:49pm UTC](https://forum.bome.com/t/osc/796/3 "2017-05-14T18:49:49Z")
Ok thanks, I did a search for OSC and nothing recent came up (maybe the search is just bad?) so sorry to repeat the question. ---
**Author:** ![SteveC](https://forum.bome.com/user_avatar/forum.bome.com/stevec/32/8250_2.png) [@SteveC](https://forum.bome.com/u/SteveC)\ **Post date:** [May 14, 2017, 7:05pm UTC](https://forum.bome.com/t/osc/796/4 "2017-05-14T19:05:36Z")
No worries, it wasn’t obvious. It was embedded with list of other requested features in the below post: [https://www.bome.com/support/kb/looking-forward-to-new-features-of-the-bomebox?backlink=L3N1cHBvcnQ%3D](https://www.bome.com/support/kb/looking-forward-to-new-features-of-the-bomebox?backlink=L3N1cHBvcnQ%3D) ---
**Author:** ![FlorianBome](https://forum.bome.com/user_avatar/forum.bome.com/florianbome/32/2367_2.png) [@FlorianBome](https://forum.bome.com/u/FlorianBome)\ **Post date:** [May 27, 2017, 2:35pm UTC](https://forum.bome.com/t/osc/796/5 "2017-05-27T14:35:03Z")
It’s the next big feature for MT Pro, but we’re still not fully done with development. But it’s working on prototype level! (we generally don’t disclose estimated release dates). ---
**Author:** ![neil2](https://forum.bome.com/letter_avatar_proxy/v4/letter/n/f14d63/32.png) [@neil2](https://forum.bome.com/u/neil2)\ **Post date:** [May 27, 2017, 6:30pm UTC](https://forum.bome.com/t/osc/796/6 "2017-05-27T18:30:25Z")
Thanks Florian ? ---
**Author:** ![gianpiero](https://forum.bome.com/letter_avatar_proxy/v4/letter/g/ebca7d/32.png) [@gianpiero](https://forum.bome.com/u/gianpiero)\ **Post date:** [November 3, 2023, 5:21pm UTC](https://forum.bome.com/t/osc/796/7 "2023-11-03T17:21:25Z")
I’d like to bump this request. I know it is being planned for some time now. I have an RME UFX and my goal would be use the class compliant Presonus Faderport 16 to control thr UFX via OSC. I know I can control Total mix with MIDI functions, but many features on TotalMix are not controllable over due midi but can be controlled via OSC. If Bomebox adds this functionality, then I will buy it. I dont think there is another solution until then:) ---
**Author:** ![SteveC](https://forum.bome.com/user_avatar/forum.bome.com/stevec/32/8250_2.png) [@SteveC](https://forum.bome.com/u/SteveC)\ **Post date:** [December 6, 2023, 4:16pm UTC](https://forum.bome.com/t/osc/796/9 "2023-12-06T16:16:31Z")
Hi, In the meantime, maybe look into [https://centralcontrol.io/](https://centralcontrol.io/) as they have software that may be able to convert MIDI to OSC and since your RME is connected to a computer anyway, this solution may work for you. Steve ---
**Author:** ![gianpiero](https://forum.bome.com/letter_avatar_proxy/v4/letter/g/ebca7d/32.png) [@gianpiero](https://forum.bome.com/u/gianpiero)\ **Post date:** [December 6, 2023, 5:40pm UTC](https://forum.bome.com/t/osc/796/10 "2023-12-06T17:40:14Z")
Thank you:) I reached out to the dev on that. I have to test the UFX with Maschine as it will recognise the UFX in class compliant. I suspect the full drivers attached to the PC allow for OSC and that in class, compliant mode OSC is not available. I know that in stand alone thr UFX doesn’t support it. If CC mode does allow it, then the real benefit will come if Bomes supports it in the box. I won’t be able to test this out for a few weeks, but I will respond back. ---
**Author:** ![SteveC](https://forum.bome.com/user_avatar/forum.bome.com/stevec/32/8250_2.png) [@SteveC](https://forum.bome.com/u/SteveC)\ **Post date:** [December 6, 2023, 6:24pm UTC](https://forum.bome.com/t/osc/796/11 "2023-12-06T18:24:50Z")
I’ve used this tool to translate MIDI from My BomeBox and access Gig Performer and VMIX OSC functionality using my Windows PC. If you are on a Mac, you could probably use OSCULATOR. I understand that you want this capability native to BomeBox so are giving you alternatives until such time it might be available on BomeBox. Steve ---
**Author:** ![gianpiero](https://forum.bome.com/letter_avatar_proxy/v4/letter/g/ebca7d/32.png) [@gianpiero](https://forum.bome.com/u/gianpiero)\ **Post date:** [December 7, 2023, 5:14pm UTC](https://forum.bome.com/t/osc/796/12 "2023-12-07T17:14:53Z")
Totally! I really appreciate it too. The developers got back to me and mentioned it will suffice even without a module for TM (via Midi) My Best, GP Gianpiero Furfaro ---
**Author:** ![SteveC](https://forum.bome.com/user_avatar/forum.bome.com/stevec/32/8250_2.png) [@SteveC](https://forum.bome.com/u/SteveC)\ **Post date:** [December 7, 2023, 6:36pm UTC](https://forum.bome.com/t/osc/796/13 "2023-12-07T18:36:31Z")
Yes, I anticipated that. They are a small team but their support is very good! Steve