Hi, I’m a MIDI translator new purchaser of this amazing software. :heart_eyes: It’s very deep and so time consuming about the learning curve: I’d like to use it with DaVinci Resolve, and I’m approaching to the programming watching/studying the tutorials and what’s written in the forum etc mixing great discoveries and bigger mistake… In the end what I’d need is to emulate dragging clicking mouse over the color page on 5 or 6 buttons (contrast, saturation, etc: attaching the screenshot), emulating the mouse positioning there and dragging it on the left or right.! I was working with a novation slmkii but too many problems, so now I’m working with a BCF2000, and I’d like to use its knobs for saturate-desaturate, contrast etc, and the faders. I think, if I’m ricght, the goal would be create an outgoing as mouse and stuff like that, but I can’t figure out the right thing to do… Could U help me a little bit? The right path is so hard to find… kind regards Schermata 2021-01-14 alle 17.30.42|690x48

Add this rule after the last rule this will change the sign if qq>64 then rr=rr*-1

Great, Glad to see this is working for you. Please mark this thread as resolved so others can find it later. In summary, it takes a REL3 type encoder from Behringer BCF2000 and converts it to mouse down, drag and release movements to the desired position on the screen. It should work for Davinci Resolve or any other application that allows for screen positioning and mouse click and drag movements. Steve Caldwell Bome Customer Care Also available for paid consulting services: bome@sniz.biz

Hello dear Steve, I’m using a beatstep now (no more BCF2000, it had some minor issues to the knobs). I thought I could only change the midi channels to the beatstep using the same project, setting the encoders as relative3 but it’s not so easy because of 2 problems I hope U can solve :pray:t2: the knob/encoder (setted in the exact position of the mouse cursor) turns always on the right, also if I turn it to the left… I’d like to use the pads as buttons to change the pages, but I can’t figure out how (they transmit only notes with mode gate or toggle, they are pressure sensitive and the values change always). In the previous settings with bcf2000 I setted the buttons via midi channel, and everything worked. I hope U can solve these problems. Thanx a lot I’m attaching the actual project I’m working on. RESOLVE_beatstep.bmtp (13.8 KB)

I’m sending also the log window when I turn right and left 1: MIDI IN [Arturia BeatStep]: B0 00 11 2: IN 0.1 MIDI B0 00 11, qq=0x11 3: RULE 0.1 assignment: (zz=0) = 0 4: RULE 0.1 assignment: (uu=500) = 500 5: RULE 0.1 assignment: (vv=500) = 500 6: RULE 0.1 assignment: (ga=1) = 1 7: IN 0.2 MIDI B0 00 11, qq=0x11 8: RULE 0.2 condition satisfied: if qq<64 then rr=qq 9: RULE 0.2 assignment: (if qq<64 then rr=qq) = 17 10: RULE 0.2 expression: (rr=rr3) = 51 11: IN 0.3 MIDI B0 00 11, qq=0x11 12: OUT 0.1 Left mouse button down at 101,916 on primary display 13: OUT 0.3 One-shot timer “Click Up”: 250 ms delay 14: OUT 0.2 Mouse move 51 (right) 15: IN 0.4 On timer “Click Up” 16: RULE 0.4 condition satisfied: if ga==1 then ga=0 17: RULE 0.4 assignment: (if ga==1 then ga=0) = 0 18: OUT 0.4 Left mouse button up 19: IN 0.9 On timer “Click Up” 20: OUT 0.9 Left mouse button up 21: IN 0.14 On timer “Click Up” 22: OUT 0.14 Left mouse button up 23: IN 0.19 On timer “Click Up” 24: OUT 0.19 Left mouse button up 25: MIDI IN [Arturia BeatStep]: B0 00 0F 26: IN 0.1 MIDI B0 00 0F, qq=0x0F 27: RULE 0.1 assignment: (zz=0) = 0 28: RULE 0.1 assignment: (uu=500) = 500 29: RULE 0.1 assignment: (vv=500) = 500 30: RULE 0.1 assignment: (ga=1) = 1 31: IN 0.2 MIDI B0 00 0F, qq=0x0F 32: RULE 0.2 condition satisfied: if qq<64 then rr=qq 33: RULE 0.2 assignment: (if qq<64 then rr=qq) = 15 34: RULE 0.2 expression: (rr=rr3) = 45 35: IN 0.3 MIDI B0 00 0F, qq=0x0F 36: OUT 0.1 Left mouse button down at 101,916 on primary display 37: OUT 0.3 One-shot timer “Click Up”: 250 ms delay 38: OUT 0.2 Mouse move 45 (right) 39: IN 0.4 On timer “Click Up” 40: RULE 0.4 condition satisfied: if ga==1 then ga=0 41: RULE 0.4 assignment: (if ga==1 then ga=0) = 0 42: OUT 0.4 Left mouse button up 43: IN 0.9 On timer “Click Up” 44: OUT 0.9 Left mouse button up 45: IN 0.14 On timer “Click Up” 46: OUT 0.14 Left mouse button up 47: IN 0.19 On timer “Click Up” 48: MIDI IN [Arturia BeatStep]: B0 00 0F 49: IN 0.1 MIDI B0 00 0F, qq=0x0F 50: RULE 0.1 assignment: (zz=0) = 0 51: RULE 0.1 assignment: (uu=500) = 500 52: RULE 0.1 assignment: (vv=500) = 500 53: RULE 0.1 assignment: (ga=1) = 1 54: IN 0.2 MIDI B0 00 0F, qq=0x0F 55: RULE 0.2 condition satisfied: if qq<64 then rr=qq 56: RULE 0.2 assignment: (if qq<64 then rr=qq) = 15 57: RULE 0.2 expression: (rr=rr*3) = 45 58: IN 0.3 MIDI B0 00 0F, qq=0x0F 59: OUT 0.19 Left mouse button up 60: OUT 0.1 Left mouse button down at 101,916 on primary display 61: OUT 0.3 One-shot timer “Click Up”: 250 ms delay 62: OUT 0.2 Mouse move 45 (right) 63: IN 0.4 On timer “Click Up” 64: RULE 0.4 condition satisfied: if ga==1 then ga=0 65: RULE 0.4 assignment: (if ga==1 then ga=0) = 0 66: OUT 0.4 Left mouse button up 67: IN 0.9 On timer “Click Up” 68: OUT 0.9 Left mouse button up 69: IN 0.14 On t…

The definition of “Relative3” on Beatstep is different that of BCF-2000. BCF 2000 sends 0x41-0x42 etc for negative numbers The relative encoder types for my Beatstep are: Type 1 - 3F/41 - 41=Right Type 2 - 7F/01 - 01=Right Type 3 - 0F/11 - 11=Right I would suggest you use type 2 and modify the negative values where: Left on Beatstep = 0x7f 0x7e 0x7d etc Left on BCF-2000 - 0x41 0x42 0x43 etc Steve Caldwell Bome Customer Care Also available for paid consulting services: bome@sniz.biz

Oh and on the pads, incoming should be note-on note number MIDI CH with ANY velocity. That way it doesn’t matter how hard you push. Steve Caldwell Bome Customer Care Also available for paid consulting services: bome@sniz.biz

Hi Steve, thanx a lot. According to your instructions I’m using the relative #2 mode and now the knobs turn on right and left, but while right turning is smooth, the left dragging movement is faster 6 times the right turning, so it’s useless because as soon as I turn the knob the cursor itself jumps in another point of the screen. I’m attaching the project and the log RESOLVE.bmtp (27.8 KB) 1: MIDI IN [Arturia BeatStep]: B0 00 01 2: IN 1.1 MIDI B0 00 01, qq=0x01 3: RULE 1.1 assignment: (zz=0) = 0 4: RULE 1.1 assignment: (uu=500) = 500 5: RULE 1.1 assignment: (vv=500) = 500 6: RULE 1.1 assignment: (ga=1) = 1 7: IN 1.2 MIDI B0 00 01, qq=0x01 8: RULE 1.2 condition satisfied: if qq<64 then rr=qq 9: RULE 1.2 assignment: (if qq<64 then rr=qq) = 1 10: RULE 1.2 expression: (rr=rr3) = 3 11: IN 1.3 MIDI B0 00 01, qq=0x01 12: OUT 1.1 Left mouse button down at 99,916 on primary display 13: OUT 1.3 One-shot timer “Click Up”: 250 ms delay 14: OUT 1.2 Mouse move 3 (right) 15: IN 1.4 On timer “Click Up” 16: RULE 1.4 condition satisfied: if ga==1 then ga=0 17: RULE 1.4 assignment: (if ga==1 then ga=0) = 0 18: OUT 1.4 Left mouse button up 19: IN 1.9 On timer “Click Up” 20: OUT 1.9 Left mouse button up 21: IN 1.14 On timer “Click Up” 22: OUT 1.14 Left mouse button up 23: IN 1.19 On timer “Click Up” 24: OUT 1.19 Left mouse button up 25: MIDI IN [Arturia BeatStep]: B0 00 7F 26: IN 1.1 MIDI B0 00 7F, qq=0x7F 27: RULE 1.1 assignment: (zz=0) = 0 28: RULE 1.1 assignment: (uu=500) = 500 29: RULE 1.1 assignment: (vv=500) = 500 30: RULE 1.1 assignment: (ga=1) = 1 31: IN 1.2 MIDI B0 00 7F, qq=0x7F 32: RULE 1.2 condition satisfied: if qq>64 then rr=64-qq 33: RULE 1.2 expression: (if qq>64 then rr=64-qq) = -63 34: RULE 1.2 expression: (rr=rr3) = -189 35: IN 1.3 MIDI B0 00 7F, qq=0x7F 36: OUT 1.1 Left mouse button down at 99,916 on primary display 37: OUT 1.3 One-shot timer “Click Up”: 250 ms delay 38: OUT 1.2 Mouse move -189 (left) 39: IN 1.4 On timer “Click Up” 40: RULE 1.4 condition satisfied: if ga==1 then ga=0 41: RULE 1.4 assignment: (if ga==1 then ga=0) = 0 42: OUT 1.4 Left mouse button up 43: IN 1.9 On timer “Click Up” 44: OUT 1.9 Left mouse button up 45: IN 1.14 On timer “Click Up” 46: OUT 1.14 Left mouse button up 47: IN 1.19 On timer “Click Up” 48: OUT 1.19 Left mouse button up Thanx a lot Steve

In order to be clear on it, if one knob’s click on the right is 1, turning left the knob’s click is 10.

Yes, you need to do more than relative 2. You need to fix the math as well in the rules. Steve Caldwell Bome Customer Care Also available for paid consulting services: bome@sniz.biz

Understood. Can U help me in that? I’m lost right now.

On your mouse drag translators change this: if qq>64 then rr=64-qq to this: if qq>64 then rr=128-qq Steve Caldwell Bome Customer Care Also available for paid consulting services: bome@sniz.biz