TInkering with pro to set 2 midi controllers working together.
Ive got the channel changed to 2 for the whole controller and working but with out anything being touched on the controller it is still sending signals through causing the faders in the 3rd party sofware (Daslight) to move and not allowing to lock programed buttons on. The window log is constantly running.
Its probably a tick in a box or a daft mistake but my brain cannot suss it
Hi and welcome to the Bome community!
Please post your project file and I will have a look.
Steve Caldwell
Bome Customer Care
Quorn.bmtp (738 Bytes)
Be gentle im a rookie 
There will eventually be another midi controller on channel one this is working fine
Hi,
I went to your preset and set the desired input port to your Worlde Easy Control and your output port to Bome MIDI Translator 1 virtual port.
For more information about device selection, see this tutorial.
In my case I’m using an alias for your controller.
You can learn more about aliases from this tutorial.
Also, make sure that Daslight MIDI in only has BMT 1 virtual port open and not connected directly to your controller.
Quorn-sjc.bmtp (1.3 KB)
Steve Caldwell
Bome Customer Care
