Hi Steve, I would like to create a rule in BMT that allows me to use the + button to easily switch the presets from my Roland GP-100 Guitar Preamp via Midi. Preset 1, Preset 2 and so on. I created the routing, but I don’t know how to implement it in BMT. Do you have an idea for this?

Hi, Try the following. It has two presets Preset 0 ‘Init’ 3 translators 0.0 - Trigger one shot timer ‘Init’ when project is opened 0.1 - Trigger one shot timer ‘Init’ with control up-arrow 0.2 - On timer ‘Init’ Initialized global variables. In this case I use the global variable ga for then initial Program change 0.3 - On timer ‘Init’ send initial program change Preset 1 - Patch Switch One translators increments ga in rules and sets the new program change ga Here is how I have my aliases set up. [image] You can learn more about aliases from this tutorial . PCwithplus.bmtp (1.6 KB) Steve Caldwell Bome Customer Care Also available for paid consulting services: bome@sniz.biz

Thanks Steve, with some adjustments it works great!

Hi Steve, is there also a template of a rule that allows me to select presets directly with the number keys without having to create each program change individually, i.e. preset 1 with key 1, preset 2 with key 2 and so on.

Sure, but you will need to have different translators for each incoming keystroke, then you can have the outgoing action of each translator switch to a different preset name or number or do a different program change. Steve Caldwell Bome Customer Care Also available for paid consulting services: bome@sniz.biz

Thank you for the information. Is there a template for thias that can be customized?

Yeah, pretty simple, I started this one. Only created 0,1, and 2. You can continue on from here. key-to-pc–example.bmtp (1.2 KB) Steve Caldwell Bome Customer Care Also available for paid consulting services: bome@sniz.biz

Hi Steve, I would like to add a function to the existing Project that allows me to switch the pre-selected patch to the next patch by using a footswitch (Translator 10). This works on its own, but not in combination with a previously selected patch, as the next patch is selected depending on ga. How can I implement this to make it work? Thanks for your support! Switching Patches with numbers and + GP-100.bmtp (3.8 KB)

Hi, It was a matter of setting ga in the rules of translator 0.0-0.9 and instead of output a hardcoded number, just outputting the value of ga. I then set this in the last translator to 11 instead of 12 which it was. // cycle back to the first if ga>11 then ga=2 Untested but it should work. Switching Patches with numbers and + GP-100-sjc.bmtp (3.9 KB) Steve Caldwell Bome Customer Care Also available for paid consulting services: bome@sniz.biz

Thanks, that’s exactly how it should work.

Hi Steve, I need further assistance please. How can the sequence continue with two-digit (10 to 99) and three-digit numbers (100 to 999)? How can i.e. enter number 10 without the program change from number 1 being triggered, but actually the program change from number 10? How can MSB and LSB be taken into account from 129 onwards? Is it also possible to enter the number at the same time, i.e. output via WIN+3 to software that does not support Midi-in? Thanks for your support.

Bome Forum

Switching patches with the + button

Bome Products

show post in topic

Home
Categories
Guidelines
Terms of Service
Privacy Policy

Powered by Discourse, best viewed with JavaScript enabled