Hi I’m new to MIDI translator pro I just bought a launch control xl and want to use it as midi translator to control my soft synths in DAW. How I’m going to use one button as trigger which will change the alignment of other midi CC value and through that I can control up to 127 cc by just click a particular side buttons and it do work for me to change cc value. I customize the template in component for e.g CC 1 button is map to wave option and then assign same but but for different value like 57 or so to different parameter how to do that by changing the cc value though MIDI translator. Please help Thankyou

Hi Steve, I used MIDI channel 16 only and shit layer work when I check in with log window. But I’m confused, in shift preset where translator 1 with CC #1 gives output of CC#57 and in main preset (I used default template factory preset 1) with translator CC#1 gives output CC#1. Shift layer work alright in MT pro but the main concern to me is that when I trying to map certain parameter let say frequency in DAW VST the CC#pp values should have been different, like if I use my main preset through MT pro frequency should map with CC#1 and then after turning off main preset and turning on shift layer let say resonance should have map to CC#57 but it not work in that way it is giving me same CC#! value through it. When I use novation component and override preset with CC#1 and CC#57 to same knob then MT pro work for shift layer but it always givng out but of CC#1 as factory preset 1. Though I use factory default 1 preset as my main layer then by changing CC values in component should work hand in hand with shift preset in MT pro. How it will give direct output as CC#1 or CC#57 just by switching preset. Please help.[ LED-Feedback-LC.bmtp (1.2 KB) ](https://)

You will need to change the incoming and outgoing CC’s and MIDI channels to those that you want to use with your LC-XL. Steve Caldwell Bome Customer Care Also available for paid consulting services: bome@sniz.biz

I don’t know how it works, I tried bunch of things with it but the default factory preset of LC-XL component is runing underneath. Though I tried to change icoming and outgoing channel for CC and MIDI. How to turn off factory template 1 as of main preset and then switch it to shift preset as of my 2 preset where same knobs are working as of pp+56. How to do this please help me I’m stuck. Please help me with an example. How component LC-xl work with MT pro so that I can switch back and forth between different cc value just by one switching preset layer.

You have to shut down component when using the controller with Bome MIDI Translator Pro as on Windows, more than one MIDI device cannot be accessed at a given time. Tell me which factory template you will be using, which button you will be pressing to switch presets, and which button you want to use to send CC 1 or 57 depending on the state of the preset. Steve Caldwell Bome Customer Care Also available for paid consulting services: bome@sniz.biz

I have a feeling this is what you really want. This project puts your LC-XL into factory 1 at project start. The Device Button will alternate presets between Main and Switch The top left button on the faders is your incoming CC. When you press it and you are in Main mode, it will send CC1 on MIDI CH 1. When you press it and you are in Shift mode, it will send CC 57 on MIDI CH 1. You still need to have components shut down when you use this project. There is no programming needed on the LC-XL since it is using a factory setting which cannot be changed. Switch - Control XL-sjc-2024-09-23a.bmtp (4.7 KB) Aliases are as follows but if you are sending to a different port you should be able to assign in the MIDI menu: [image] Switch - Control XL-sjc-2024-09-23a.bmtp (4.7 KB) Steve Caldwell Bome Customer Care Also available for paid consulting services: bome@sniz.biz

Hi steve Thanks for help it really help me for my project . One last thing I stuck on with as inside MT pro every In out work very well with midi in out and LED feedback but when I open my Daw Ableton and try to map with Soft synth Diva, I map knob CC#1 CH 1 from my main preset to FM knob from synth then after switching the preset as shift layer the same knob which giving output of CC#57 CH 1 in MT pro, should map with CC#57 to Tune mod depth while mapping in Ableton it is not working. I have translate e MIDI and they work well in MT pro but it not working with Ableton. I don’t know what wrong, is with preference tab in Ableton or Alias in MT pro I don’t know what is wrong. Please help me. [B39D23C8-9481-48F3-8A4E-F3567E2BB1AC] [629C1128-5CB2-41E2-8348-A1027891874E] [B35FFFD6-1E27-46B2-A2B3-A7EC6757F47A] [FDFC24F0-8751-4BBD-9155-4C70D5FE2149] [869C68A4-93A8-4FDB-828D-895F414EC63F]

Well, having the same controller send to 2 different ports is going to be problematic. If you are going to both use a MIDI Remote Script, I would have the controller go through BMT1, and then have it go to BMT2 that is not controlled by the script. [image] [image] [image] [image] Then in Bome MIDI Translator Pro use Factory template 1 for anything that uses the Control script and Factor template 2 for anything that you want to use MIDI learn. Since the buttons on the script template are already used, I would rather switch templates by pressing and hold ‘Factory’ while pressing the template number on the bottom. You would press the first button for script controlled functions and I would assign Factory 2 (the second one) for MIDI learn. Then for Bome MIDI Translator, you put a MIDI thru route to and from your controller to Ableton Live (BMT 1). [image] When you switch to Factory template 2, you have translators to disable the MIDI through route for BMT1 and let translators handle output to BMT2 (MIDI Learn with no script). Your switching trigger would be the MIDI message that the Controller sends when you change templates. This is what is sent by your controller when switching to factory template 1. F0 00 20 29 02 11 77 08 F7 and factory template 2 F0 00 20 29 02 11 77 09 F7 Setting this up for you is beyond the scope of free support so for me to create this solution, it would require a paid private consulting engagement. The attached just include the renaming of aliases and setting up a MIDI thru path. It is not a complete solution and I’m not sure if using factory templates is what you had in mind. If not, you would need a free button (not used with the script) to switch functions so you might give up some default functionality of the controller. Switch - Control XL-sjc-2024-09-24.bmtp (5.0 KB) Steve Caldwell Bome Customer Care Also available for paid consulting services: bome@sniz.biz

You may try this. On project open and response from query of the LC-XL, preset ‘Script’ will be selected and ‘Custom’ unselected and routes will be in place for Ableton-Script to Ableton. By switching to Factory 2 template , ‘Custom’ will be enable and ‘Script’ disabled. Routes will be enabled for ‘Ableton-Learn’ and routes to ‘Ableton-Script’ will be disabled. Right now there are no translators in either preset but if you add them and use the option swallow then the translators will override the thru routes. Switching Back to Factory 1 template again, and it will use the Script path again. Ableton Live must use BMT used for the script path only above and never the LC-XL directly. For MIDI learn, the Virtual MIDI port used should match your alias in the Project file. Here is how I have Ableton Live setup. [image] [image] [image] [image] [image] And my aliases in the project file. [image] If for some reason you don’t get response from a given virtual port, disable it and re-enable it in Ableton Live. Switch-by-Template-XL-a.bmtp (5.0 KB) Edit: You may also note there is a different method of controlling presets. When one preset is activated, there are several translators that can be written to turn off other presets. The same technique is used for enabling/disabling MIDI thru routes. Steve Caldwell Bome Customer Care Also available for paid consulting services: bome@sniz.biz

Hi steve, Thanks for every replies, it help me a lot. Only thing left which can complete my project is factory template change. I feel over the head I understand about factory template which Raw MIDI system exclusively message should use, when it comes to routing I could get there. The project you share I had experiment with it as I can but the last thing which holding me complete my project is switching factory template and after changing factory template, the out of MT pro should act as In for Ableton live. I’m planning to switch factory template by shift layer which we created earlier. Main layer act as scripted layer and shift as a custom layer. Please help me.

So you want to use Factory 1 template for MIDI Remote Script and one of your custom templates (programmable by components) for you custom template? Steve Caldwell Bome Customer Care Also available for paid consulting services: bome@sniz.biz

Bome Forum

How to control soft synth using different cc values

Bome Products

launch-control

show post in topic

Home
Categories
Guidelines
Terms of Service
Privacy Policy

Powered by Discourse, best viewed with JavaScript enabled